Summary, Conclusions, and Recommendations
Civil engineers have responsibilities for the planning, design, construction, operation and maintenance of physical infrastructures. These infrastructures include all types of buildings,...
Extreme Wave-Force Calculation Procedure for 20th Edition of API RP-2A
The paper describes the revised guideline design wave force calculation procedure approved for the 20th edition of the API-RP2A WSD and the first edition of the API-RP2A LRFD and contrasts...
Shear and Interface Strength of Clay at Very Low Effective Stress
Thin-specimen direct shear (TSDS) tests were conducted to measure the shearing strength of kaolinite, and interface strengths between kaolinite and acrylic plastic and anodized aluminum,...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Seven
Prepared by the Program Committee of the Offshore Technology Conference of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Selected Coastal Engineering Papers of Robert L. Wiegel
Civil Engineering Classics
Sponsored by the Coastal Zone Management Committee of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This collection contains 54 papers and...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Four
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Effects of Impervious Area Estimation Methods on Simulated Peak Discharges
The variability of simulated flood discharges is evaluated using two methods for estimating impervious surfaces and common design methods in the Mission Creek watershed (31 sq km) located...
Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Three
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Lessons Learned from the December 26, 2004 Sumatra Quake and Tsunami
On December 26, 2004, a devastating earthquake occurred off the western coast of Sumatra, Indonesia, creating seismic and tsunami waves felt by people who live around the Indian Ocean....
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Celerity: Wave Action
This chapter discusses the tabulation of wave action data in Microsoft Excel....
New Shear Stud Provisions for Composite Beam Design
The 2005 American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings (AISC 2005) will contain significant changes to the shear connector provisions for...
Members Subjected to Torsion Combined with Other Actions
The combination of torsion with bending and shear (T-M-V) in members with both transverse and longitudinal reinforcement is the most commonly encountered combination in practical cases....
Berm Breakwaters?Design, Construction and Monitoring
The philosophy of the fieldwork of Berm breakwaters was applied in Iceland. A few case histories were described with emphasis on quarry investigations, design, construction and monitoring....
Comparison of Hydrodynamic Parameters for a Floating Breakwater
The U. S. Army Engineer Research and Development Center is in the process of developing a Rapidly Installed Breakwater System (RIBS) for use in Joint Logistics Over the Shore Operations...
Montioring and Modeling of Tandem Breakwater System at Hammond, IN
A tandem breakwater system was constructed in 1989-90 to provide protection for a large marina at Hammond, IN, at the south end of Lake Michigan. A five year monitoring program (1993-98),...
Advances in Buoy Technology for Wind/Wave Data Collection and Analysis
Considerable advances have been made recently to reduce the cost of gathering meteorological and oceanographic data from coastal waters, especially for meteorological and oceanographic...
St. George Habor?Berm Breakwater Construction Considerations
During the period 1984-1987 three berm breakwaters with a total length of approximately 800 meters were constructed at St. George Harbor on St. George Island in the Pribil of Chain of...
Calibration of Water-Velocity Meters
The U.S. Geological Survey (USGS), as part of its responsibility to appraise the quantity of water resources in the United States, maintains facilities for the calibration of water-velocity...
Return to search